Setting up a wavelength range Extender device or a router device using the web interface is a simple yet effective way to improve your network coverage. For all those who are facing weak signal issues or dead zone problems at home or office, completing the wifi.wavlink.com setup can help in improving the network. You can enjoy a more stable and reliable internet connection all over the space after adding the device to your home networking system or office networking. Confused how to complete the process? Don't know much about the web configuration? No worries just read the below given kind very carefully and you will know the step by step information.
Installation of hardware
Installation of device hardware is the first step of the wifi.wavlink.com setup. Whether you are going to configure a router device or a range extender device, hardware setup plays a very crucial role. Using the following steps you can easily installed the device hardware without any mistake:
Begin the installation with unboxing after range Extender or router device whichever you are going to configure.
After that, start looking for a place to put your device. In case you are going to configure a router device then you have to place it closer to the modem. Make sure the difference between the modem device and the router device is only that much as the long cable you have. If you are adding a range Extender device to extend the network of your router device then you have to place it closer to your router device for the initial set up. Later on you can relocate the device to boost your network performance.
After placement of the device you have to connect your router device with the modem device using an ethernet cable. This step is not required if you are performing an extender setup.
Once the connection is done you have to proceed and start your device. To turn on your device you have to use the power adaptor and connect it with the power outlet. Turn on the power supply and wait for your device to start.
When your device starts, check whether its LED gets stable or not. If it gets stable then you can proceed with the configuration otherwise wait for it to get stable as it signifies that the device is not properly booting up.
Configuration of device
Moving towards the configuration, you need a client device to initiate the process. Computer laptop or smartphone devices can be used to gain access to the wifi.wavlink.com setup page. Once you reach the setup page you can initiate the process of configuration and enjoy a stable network easily.
To begin the process, first you have to connect your device with the wavlink network. Whether you are configuring an extender or a router this step is important. You can connect using internet cable or via wireless network details.
After connecting you have to open the web browser to reach wifi.wavlink.com setup page.
As the page appears on the screen you need to enter the standard login credentials to gain access to the dashboard.
When the dashboard appears it will help you to complete the configuration, you have to choose your device and then follow your on screen guide.
During the configuration process you have to replace your default network details to keep your network secure.
In addition to this you have to change the admin panel login credentials also.
Make other advance changes and submit the changes done by you.
Don't forget to perform a network test after the configuration is done. Testing the setup is also as important as its setup.
Conclusion
wifi.wavlink.com setup procedure specified above is the simplest method to configure the range Extender device or router device offered by Wavlink. The configuration process above will not only help you in completing the process quickly but also effectively. You can follow the step by step instructions to get a better network. After configuring the device you will no longer face connectivity problems with your net worth and enjoy a stable network throughout your space.
