Home Improvement

Great Options Opened With Electric Insulation Blowing Machine

Fiber glass is mainly used as thermal and acoustic insulation indoors. Sloping roofs, under wooden floors and in the inner walls are the most common applications. The reason that Fiber glass is mainly used indoors is that it quickly loses its insulation value when it comes into contact with moisture.

Advantages and disadvantages of glass Fiber


Many mineral fibers are released during the processing and installation of Fiber glass insulation. These can cause irritation and inflammation of the eyes, skin and airways. It is therefore advisable to work with goggles, mask and gloves.


- Easy to place, even by do-it-yourselfers

- Fireproof material

- Perfect for closing uneven surfaces thanks to the compressibility

- Relatively cheap insulation

- Recyclable insulation that is extracted from residues

For that making use of the fiberglass insulation blowing machine is a good deal.

Choose the right material for each job

Fiber glass is available in various variations, versions and thicknesses. Always check which type you need to avoid unnecessary costs and poor insulation values. Below you will find an overview of the different options:

Available thicknesses

The thickness of Fiber glass will have a major impact on the final acoustic and thermal insulation value. The thicknesses of Fiber glass start from 60mm and run upwards per 20mm (80, 120, 140, 160, 180,). A minimum thickness of 160 mm is recommended for a pitched roof. To have no seams you can also work with two layers that are sharpened. You can also know for sure regarding how to use insulation blowing machine.

Available finishes and shapes

Fiber glass is available in the form of flexible sheets, flange blankets or bulk. Sometimes a finishing layer is already provided along the outside. This can be easier to process (paper) or to use as a vapor barrier (aluminum). The overlapping finish can be used to seal seams or to staple wood constructions.

Placing Fiber glass - always provide a vapor barrier!

To prevent the insulation from absorbing moisture from the rooms, you should always provide a vapor barrier along the inside of each room. You can use flange covers with aluminum coating for this purpose, where you then glue the seams tightly together with accompanying tape. You can also buy a plastic tarpaulin to use as a vapor barrier. The electric insulation blowing machine happens to be the best option here.

Request free quotations here for insulation works

Beside the size and limit of the two sorts of blowers, there is additionally a distinction by the way they are fueled. The expert evaluation blowers use gas to control the motors, while the low limit can use around 20 amp of household circuit.

Despite the fact that the insulation procedure may seem basic, it is still much better to leave the work to experts. Renting a blower can cost you around a hundred dollars; besides, the entire procedure can be long and tiring. The procedure is additionally entirely precarious in light of the fact that you need to do the insulation impeccably to accomplish incredible results. Subsequently, it would do you well to counsel an expert who can deal with the insulation of your attic or the dividers in your house.

About us:- Isolation is a smart investment that will pay you back in time and again. Via the form below, you can freely request offers from recognized contractors in insulation works. Comparing prices and methods has never been easier. This service is offered to you free of charge without a purchase obligation.