A concrete batching plant is actually a facility where concrete is mixed and prepared for construction purposes. You can use it to create ready-mix concrete, or you can use it to precast concrete components. The plant is made up of quantity of storage silos, weigh hoppers, conveyors, mixers, and other equipment. The concrete is mixed in batches, and every batch must be carefully monitored to ensure that the proper combination of ingredients is used. Here are the components of a Chinese concrete batching plant:

1. Aggregate feeders

An aggregate feeder is mainly responsible for delivering the aggregate materials that can be employed to create concrete. These materials should be delivered from the correct proportions and also at the best time in order to produce high-quality concrete. To have this, aggregate feeders are generally provided with weighing devices and conveyor belts. The weighing devices be sure that the correct volume of each material is delivered, even though the conveyor belts transport the materials towards the mixer inside a timely fashion.

2. Cement weighing hopper

The function of a cement weighing hopper is usually to weigh and feed the cement in the mixer. The hopper is placed on a platform that is supported by load cells. The operator loads the cement into the hopper through a wheelbarrow or other suitable equipment. The load of your cement is consistently monitored and controlled by an electronic device. Once the desired weight has become reached, the hopper will stop automatically. This helps to ensure that the right quantity of cement is commonly used in each batch of concrete.

3. Twin shaft mixer

A concrete batching plant typically consists of a twin shaft mixer, which is mainly responsible for mixing the various substances that go deep into making concrete. The twin shaft mixer typically has two horizontal mixing paddles that rotate in opposite directions. Since the paddles rotate, they pull the material from your sides of the mixer and lift it, allowing it to fall back down and also be thoroughly mixed. This step ensures that all the ingredients are evenly distributed through the mix.

4. Admixtures

Admixtures are included with Chinese concrete batching plant mixes in small amounts to change the properties of the fresh or hardened concrete, so that you can obtain certain desired characteristics. The most prevalent kinds of admixtures used belong to among the following categories: air-entraining agents, water reducers, accelerators, retarders, pigments, and bonding agents.

Air-entraining agents introduce microscopic air bubbles into the concrete mix, that helps to increase its workability and durability. Water reducers are widely used to decrease the volume of water needed to have a given consistency, without affecting the concrete's strength or another properties. Accelerators increase the velocity from which the concrete sets and hardens, while retarders slow down this technique. Pigments are put into produce concretes with certain colors while bonding agents boost the adhesive strength in the concrete.

Concrete batching plants from China are important pieces of equipment for concrete construction. It can mix various proportions of cement, sand, gravel, water, and admixtures to produce high-quality concrete. The quality of the final product is determined by the standard of the mixer. It is therefore very necessary to pick a good mixer to your concrete batching plant for sale.