Hand tools are the most needed things people need in their toolbox at home. Probuilt, as a Chinese hand tool manufacturer supplier, brings you the best quality hand tools. Getting a quality hand tool and maintaining it will keep you going for years. They will thank you because the more you care, the longer it will work.
Tool Maintenance Tips
cleaning tools
Wipe each tool clean after use. Wipe off excess dirt Remove dirt, oil, etc. Hand tools can be cleaned with soapy water. After cleaning all instruments Wipe all crevices and spokes with a dry cloth to ensure maximum cleaning. This may require extra work. Especially if the coating sticks there for a long time. But the results are worth it. During the cleaning process, you can look at each tool to see if there is any damage. If there is a problem, repair or replace the device for safe use.
Manual sharpening tool
Corrosion and rust prevention are critical to tool maintenance. If the tool is rusted, you can use steel wool or a wire brush to remove the rust. If it's a wooden handle, if it gets rough, smooth it out with a scrap cloth. Sharpening cutting tools is important. It should be done at least quarterly. There are many ways to sharpen knives, such as files and whetstones. Sharpness and blade type may vary by rock type. For example, an excavator should be extended at a 45-degree angle for maximum digging capacity.
Lubricate hand tools
So lubrication is very important. This makes the tool easier to use and more durable. Treat tools with worn parts with high-quality oil. Make sure you have all moving parts. Lubricating your hand tools at least every six months will not only prevent rust. But his tools are in good condition.
Store your tools properly
Regardless of their intended use, all tools must be stored in a dry place. Organize your hand tools into similar categories and store them in convenient storage solutions such as drawers, cabinets and cabinets. You can also purchase quality kits with inflatable casings for easy protection and storage. Also, be careful with sharp knives, don't flatten them.
In conclusion
To properly maintain your hand tools, store them properly and clean them regularly. Also, sharpen your tools as they become dull.
In addition, equipment must be regularly lubricated and inspected. Finally, you should always follow the manual.
If you take good care of your equipment, they will last a long time. In addition, the chance of breakdowns and accidents is also reduced.
